3-D Service specializes in the sale, repair and service of commercial and industrial equipment used in the electric utility, automotive, pulp and paper, manufacturing, chemical, wastewater treatment, transportation and metal producing industries. Additionally, 3-D provides Total Motor Management™ services to help customers reduce the risk of equipment breakdowns while lowering overall repair and maintenance costs. On-site preventive and predictive maintenance and 24/7 emergency breakdown services are also available. For more information about 3-D Service, call toll-free 1.800.837.1614.

Chemical, plastics, food, pharmaceutical, mining, paper.

Professional Electrical Engineering design services in Montana, Utah, and Wyoming.

For over 30 years, Airex Industries has been committed to offering commercial and industrial dust collection equipment to help meet your air quality and filtration requirements. Breathe easier knowing that you can trust our knowledgeable staff to give you the quality service and products that have kept Airex Industries' customers satisfied for all these years. Airex Industries also specializes in the design and development of the energy-saving economizers such as Heat exchanger plates, Networks of Glycol and Freon exchangers. Engineering - In the later stages of the proposal phase, the engineering department will provide systematic and collaborated solutions while respecting the environment. Airex Industries offers a computer-aided design service collaborating with the engineering department by providing plans and project estimates for approval and final manufacturing. All the files are archived for later consultation. Our experienced engineering department will provide a systematic approach to developing durable solutions while respecting and protecting the environment.

Blast furnace design and engineering services; civil/structural, mechanical, electrical and refractory specialists. Environmental air quality studies and system design. Industrial gas cleaning system design and renovation, coal injection systems for the blast furnace. Secondary metallurgical treatment and vacuum degassing systems. Procurement, expediting, and quality control services. Construction management, field engineering, checkout and start-up services.

Digital variable speed DC and AC drives/control systems for mill applications, motors, gear boxes, pulse generators, programmable controllers and meters (length, speed, stretch, gage, etc.) Digital retrofits for analog armature drives and MG sets. Complete engineering services and service support. Full line of resistors.

BSE is the consultant No. 1 worldwide, for high productivity and low cost steel mills. We help you to reduce your costs, while you are able to increase your productivity. The technology of our products has been proven in many EAF steelmills around the world. We offer the following services and products: Consulting (human and technical approach), oxygen technology, eaf modernization, environmental technology, engineering services, measurement and control solutions, multi slit rolling technology. We would be pleased, if you visit our webside or contact us for further information.

Engineering, environmental and information technology services to the iron and steel industry. Materials processing and handling; facilities and infrastructure engineering (including industrial facilities); environmental management (including air quality); assessment and remediation; water resources; and information technology.

Engineering, construction, and maintenance company specializing in process-oriented industrial facilities. Principal markets include the pulp and paper, chemical, petrochemical, polymers, industrial fibers, industrial power generation, steel and gas industries.

Engineering, procurement, project management, construction services for concentration and agglomeration of ferrous and nonferrous ores; direct reduction of iron ore; ironmaking; EAF and BOF steelmaking; ladle metallurgy; thinand medium slab casting and rolling mills.

Leading Manufacturers of Transformers, Electrical Laminations, Stampings & Cores Leading Traders of CRGO & CRNGO

Complete engineering for design and construction of industrial furnaces and related equipment. Project engineering and detailed design of furnaces and mechanical handling equipment. Project management, cost control, detailedschedule control, procurement/purchasing, expediting/inspection and construction management. Turnkey installation of galvanizing/annealing processing lines, thin cast strip facilities, walking hearth and walking beam furnaces, continuous pusher furnaces, coil annealing furnaces, rotary hearth furnaces, roller hearth, and batch type furnaces for reheating and heat treating o

Having completed over 4,000 automation projects worldwide, Brock Solutions is one of the largest industrial engineering solution providers of real-time automation systems for metals manufacturing. From the “docks to finished goods”, our services include AC / DC drive systems, industrial control solutions (PLC, DCS, PC), manufacturing execution systems (MES), panel and control room manufacturing.

INFRARED thermal imaging, save time, money and improve safety. Independent certified infrared inspections at reasonable rates HQ South Jordan, Utah Tel: (801) 718-4914

An engineering consulting firm specializing in electrical power system studies. These studies are used for design, expansion planning, new facilities, troubleshooting, and maintenance. The objective is a reliable power system with minimum downtime. The studies include the following: short-circuit, protective device coordination, load-flow, motor starting, voltage regulation, voltage flicker, power factor correction, and harmonic. C-M-B conducts field investigations for power system problems.

Infrared scanning services, relay calibration, cable testing, start-up and acceptance testing as well as circuit breaker services such as rebuilding, retrofit upgrades, testing and parts.

Full service engineering with mechanical, civil, structural, and electrical engineering capabilities. Services run the full range from concept development through detail drawings. Specialties include mill machinery, processing machinery; material handling equipment, equipment modernization, piping, foundations and industrial structures for the ferrous and nonferrous metals industries.

Casne Engineering, Inc is one of the largest single discipline electrical engineering firms in the Pacific Northwest with over 40 full-time employees holding Professional Engineer registration in 21 states. We provide design services for complete power and control systems. We also provide construction assistance, start-up and commissioning services, as well as operator training. Our wide range of experience in electrical systems includes medium and high voltage substations, 480V distribution, emergency and standby power generation, interior and exterior lighting, energy monitoring and control systems. We are proficient in the design, integration and commissioning of automation & control systems utilizing PLC’s, networked computers, & SCADA software.

Studies, designs and construction monitoring for environmental and plant engineering projects for steel mills, foundries, and general industry. Engineering from investigations, studies, and pilot plant operations through design, construction monitoring and start-up assistance for projects ranging from end-of-pipe treatment, to cascaded water re-use, to complete water recycle systems. Also water supply and treatment, cooling water systems, storm water management and underground storage tank management.

Total Solutions for Maximizing Uptime.Cutler-Hammer Engineering Services and Systems (C-H ESS) provides a full-range of on-site services including: Installation, Start-Up / Commissioning, Preventive and Predictive Maintenance, Systems Integration, Power Systems Studies and Equipment Life Extension. And, by choosing our start-up / commissioning services on your Cutler-Hammer product, you will receive a one (1) year extension to the factory warranty.For more information, or to locate the nearest service office call 1-800-498-2678.

Supplier of automation and process control systems for metals industry HW integrator, SW development, installation/start-up service.

Engineering, equipment, automation and control, and consulting services within the following areas: ironmaking, cokemaking, steelmaking, continuous casting, rolling mill and processing line, environmental.

Engineering and project management for the iron and steel industry, including feasibility studies, cost analysis, design concept, facilities planning; design and construction engineering, specifications, procurement, cost control, and checkout and start-up assistance. Experienced in design of melt shops, rolling mills and associated processes including environmental engineering studies for air pollution abatement, water treatment, and industrialwaste treatment; resource recovery and reuse; energy management and fuel conversions.

Retrofit Dry Type Transformers capabilities. Custom built Power & Specialty Distribution Dry-Type Transformers up to 15,000 KVA, 35 KV class. Harmonic Mitigation Transformers for non linear load applications. Rectifier Duty Dry Type Transformers for VFD & DC Drives applications.

Electrical transformer design and engineering services provides electrical lighting design, electrical engineering power system at MEP Services in India