Adwest has designed, fabricated and installed over 550 RETOX Regenerative RTO thermal oxidizers for VOC Control from paint finishing, coil coating and bake/paint oven exhaust. All RETOX RTO systems are shop assembled and are available from compact modular designs from 1,000 to over 80,000 cfm air flow rates. Custom Turnkey and Halogenated RTO Oxidizer designs are available along with secondary heat recovery systems and custom control panel designs.

For over 30 years, Airex Industries has been committed to offering commercial and industrial dust collection equipment to help meet your air quality and filtration requirements. Breathe easier knowing that you can trust our knowledgeable staff to give you the quality service and products that have kept Airex Industries’ customers satisfied for all these years.

Formerly Geraghty & Miller, Inc. Providing process engineering, environmental compliance and Brownfield redevelopment services from over 50 offices throughout the US.

BSE is the consultant No. 1 worldwide, for high productivity and low cost steel mills. We help you to reduce your costs, while you are able to increase your productivity. The technology of our products has been proven in many EAF steelmills around the world. We offer the following services and products: Consulting (human and technical approach), oxygen technology, eaf modernization, environmental technology, engineering services, measurement and control solutions, multi slit rolling technology. We would be pleased, if you visit our webside or contact us for further information.

Bender Corporation, Inc. serves steel mills world-wide. BCI specializes in EAF steelmaking, integrated steelmaking, high production meltshop design, EAF emission control, steel mill emission control, and the scrap preheating Midshaft EAF developed by Manfred Bender.

BSDE makes standardized 316L stainless-steel harsh-duty air conditioners for corrosive, dusty, hot (or cold), humid or hazardous (explosive) environments. Sand and dust do not clog low-density fins. Full cooling from 131ºF (55ºC) to 32ºF/0ºC standard (to -40ºF/C as option). NEMA 4X IP56. 316L cabinets and epoxy corrosion protection baked onto all coils and tubing. All-mechanical controls protected inside NEMA 4X IP66 boxes. Fast shipment. Through-the-Wall, Ductless (mini) Split, Roof-Mount configurations. Optional incoloy tubular heaters. Optional Division/Zone 2 or 1 and T3B heat.

BryCoSystems manufactures a complete line of design build, high-pressure atomization odor control, dust suppression and misting systems to meet the most difficult of applications. Unlike other companies that only offer a hand full of systems to choose from, we listen very carefully to your needs and build a system based on your specific situation. The results... over 700 unique possibilities. Since our first odor control system, built in 1993, we have solved odor control and dust suppression problems throughout the United States and Europe.

Alternative fuel use of tar and oil contaminated materials. Co-burning the waste at three company owned power plants.

From Water Cooled Panels to complete Electric Arc Furnaces, from Ladles to complete Ladle Furnaces, from Tundishes to complete Continuous Casting Machines, from Ducts to complete Fume Treatment Systems and from Engineering Services to Turn-Key Plants, CVS offers economically viable solutions at European standards.

Danser Inc. has been a solutions provider to the industrial marketplace for over 65 years. Our experienced staff is able to offer: turnkey piping solutions, Vacuduct high temperature (2800 Deg F.) ceramic fiber lined ducts, hot work repair services, spiral wound pipe, industrial dampers, and steel fabrication. We can provide you any level of service you require: design, fabrication, field installation, and commissioning. Our crews are ready to travel anywhere in the world you might need them.

A North Carolina company that makes Baghouses designed to meet European Filtration levels. Has production on three continents. Equipment and engineering services.

Manufacturer of environmental test chambers providing temperature chambers, humidity chambers, environmental test chamber, temperature humidity chamber, environmental test chambers, and thermal shock chambers, s.

Full service testing laboratory specializing in medical device package testing, Hazmat and materials testing services.

Manufacture of dry fog agglomerative dust suppression systems utilizing ultrasonic low water flow nozzles that produce micron size fog droplets that attach to like size airborne dust particles. The wetted dust particles fall back into the process due to increased mass. Dry fog wets the dust, not the material, resulting in low water consumption and no significant wetting of the process material (max. ½ %). No chemicals required. High efficiency. Applies to steel making, mineral processing, mining, & material handling. Applications for conveyors, crushers, screens, bulk loading & unloading.

Provider of 24 hour/day emergency radiological incident response support, pre-incident consulting, site surveys, radiological instrumentation calibration and repair, radioactive source/material recovery and disposition, pre-incident training (radiation worker and HAZWOPER). EnergySolutions possesses two radioactive materials licenses which can be used in any state for the support of radiological work. Look to EnergySolutions for any of your radiological needs. For any rad emergency, call 1-877-RAD-PROS.

Environmental Regulatory Services including: Air and Water Permits, Multi-media Audits and Compliance Assessments, SPCC Plans, Storm Water Pollution Preveions Plans, Waste Reduction & Management, emissions reporting and release reporting.

An environmental chambers manufacturers directory including environmental test chambers, vacuum chamber, environmental testing, temperature chambers, humidity chambers, environmental test chamber, temperature humidity chamber, used environmental test chambers, altitude chambers, thermal shock chambers, walk-in chambers and vibration chambers.

We take this opportunity to introduce ourselves as one of the fastest growing engineering company in Asia. We are in Environment Control & Automation Business & have extended our services very successfully in India and abroad as a “Partner of Productivity� of the customer. We have over 100 systems running successfully and achieving emission levels below 100mg/Nm3. We have an overseas presence also in country like: - Thailand, Vietnam, Philippine, Malaysia, Costa Rica, Tanzania Etc.

Envirosystems, LLC.,- providing solutions for air filtration, dust collection and surface coating removal needs.

Evapco Inc. is an employee owned manufacturing company with global resources and solutions for worldwide heat transfer applications. Evapco is dedicated to designing and manufacturing the highest quality products for the evaporative cooling and industrial refrigeration markets around the globe. Evapco supports its worldwide customers with manufacturing facilities and sales offices strategically located around the world. Evapco's closed loop fluid coolers are the right products for the application of blast furnace and electric arc furnaces cooling, continuous casting cooling and cold rolling mills equipment cooling.

Fumes extraction system for AOD, EAF, Induction, LRF & Submerged Arc Furnaces for steel making, ferro alloys, SS making Plants.

NOx Reduction Technology (selective non-catalytic reduction & Urea-SCR) for furnaces. Engineering, design, and installation.

Total solution Providers for Electrostatic Precipitators, including greenfield, revamping, upgradation, spares supply

Equipment Engineer Design Structural Steel Fabrication Plant Surveys and Troubleshooting Tanks and Installation Fabrication Plant Maintenance Programs Design and Build Projects Field Crew and Installation Services Rebuild Existing Equipment Mechanical Contracting Mercury Control Testing

Kaercher Engineering GmbH the leading design company of water cooled equipment for steel mills world-wide. KE GmbH specializes in EAF revamping of lower and upper furnace vessel, w.c. side wall panels in steel and copper, complete furnace roof incl. take off-gas elbow and complete w.c. off-gas systems with drop out box and w.c. duct work. Our program covers BOF cooling stacks as well as cooling sytems for Ladle furnace application.