Home : Finishing Equipment : Bar turning

- Finishing Equipment: Bar turning

Links:

• Casey Equipment Corp.

  Buy, sell and rebuild second-hand steel mill equipment worldwide. Specializing in hot and cold rolling mills for producing flat and long products; large overhead traveling cranes, continuous casters, process lines, shear andcut-to-length lines, large DC mill motors and equipment take-out and removals.

• Continental Steel & Tube Co.

  Cold rolled, hot rolled, stainless galvanized, coils, sheet, bar, tubing, rounds, flats, strip, carbon and alloy grades in plate, pipe, rounds, shapes. Electrical steel. Coated products: galvanized, galvalume, and elecrogalvanized.

• Danieli Morgardshammar USA

  Long product rolling mills including shears, cooling beds, straighteners, cut-to-length lines, stackers/bundlers and tying machines.

• Ferrex Engineering Ltd.

  Meltshop engineering—all disciplines. Meltshop equipment supply including transfer cars, lance carriages, water cooled panels, furnace shells, scrap buckets, ladles, alloy additions systems. Air pollution system design, modification and supply. System and process feasibility studies with cost analysis. Meltshop and casting facility process control engineering. Custom designed automatic in-line billet weighing systems for improved mill yield. Rolling mill engineering—all disciplines. Rolling mill equipment supply including reheat furnace, billet charging and discharging, mill stands, loopers, t

• GWB North America

  GWB North America GWB specializes in supplying Cardan Shafts that are world renowned for having small rotational diameters while retaining high torque capabilities. Superior bearing load ratings and high torsional stiffness are the hallmarks of our products. We supply a broad variety of customized universal shafts. Torque transmission capabilities range from less than fifty Newton Meters to super heavy-duty shafts transmitting torque in excess of fifteen million Newton meters. Our quality products are priced competitively, and delivered within very limited time schedules.

• Hasemann Maschinen

  For more than 15 years Hasemann Maschinen is spezialized in the purchase and supply, at reasonable cost, of first class second-hand machinery for the steel and non-ferrous producing industry treating e.g. semi-finished bright steel bars, tubes and wires. The machines are in general immediately available ex stock/ex site and in some cases they even can be still inspected in running condition. These machines are for example: - Wire drawing machines (horizontal and vertical bull-blocks) such as: Breitenbach, Herborn - Multiple drawing machines such as: Henrich, Herborn, Niehoff, Samp - Chain drawing machines for bars and tubes such as: Bültmann, Dahlhaus, Gabande, Kieserling - Combined drawing machines

• Hetran, Inc.

  The fully computerized, quality performing (with tight tolerance and zero defect), low maintenance bar to bar processing line consisting of some or all the following components: pre-straightening, peeling, straightening/burnishing, chamfering, abrasive belt polishing, bundling and miscellaneous material handling can be installed either as stand-alone units or a Complete Processing Cell to optimize the production and increase your profitability. Turning (Peeling) Machines for Bars and Tubes

• Kastalon Inc.

  Cast polyurethane products, Koat-A-Roll, Koat-A-Wheel, coil floor pads, coil protection equipment and services, crane bumpers, roll coverings (60-in. dia max.), slitter spacer tires, overarm separator spacers, wheels, pads.

• M & M Greaves Machinery

  Suppliers of Used Bar Turning equipment.

• Penna Flame Industries

  Manufacture process rolls complete, 4-in. dia to16-in. dia. Work rolls, backup rolls, table rolls, pinch rolls, feed rolls, pickling rollers, and more.

• TDI Group, LLC

  Steel mill equipment, used, reconditioned, rebuilt, including rolling mills, cranes, melt shop equipment, electrical and mechanical mill drives. Plant equipment certified appraisal service. Surplus asset management and marketing services.

• TrueForge Global Machinery Corp.

  TrueForge Global Machinery Corp. specializes in Cold Bar Processing, Forging, Tube/Pipe & Steel Mill Machinery & Equipment. We are continuously looking to purchase machinery and have a large selection available on our Web Site at www.trueforge.com. Ask for a copy of our (80) page 2007 Color Catalog in which you will find hundreds of Mills and Machine Lines of all types currently available for inspection and delivery. Please visit our Web Site at www.trueforge.com

• U.S.A. Machinery Corp.

  Liquidations, appraisals and brokerage of all types of steel mill equipment. One piece or an entire plant. Also buying and selling of used rolling mills, EAFs, transformers, cranes, buckets, continuous casters, ladles, straighteners, bag houses, levelers, locomotive cranes, tube and pipe mills, shears, terminal equipment and roll tables.

• Universal Welding, Inc.

  Services: Specialists in reconditioning, rebuilding, and improving mill components: spindles, couplings, straightener rolls, cold reduction rolls, pulling and leveling rolls, pinion and gears, mill housings. Steel processing,fabrication of new mill rolls. Large sawing capabilities.

Created by AIST

Pages Updated On: Thu Nov 20 2008 - 04:22:19